The jasmine is a rectangular in-wall version of the Wattle and can be used as your main front and centre channels as well as for rear channel surrounds. The Jasmine use the identical drivers and crossover network as in the Wattle and will provide precise tonal matching when installed with this in-ceiling model. Construct your own wall of sound with the Jasmine.
Frequency - 65Hz-20kHz
Power - 60W RMS
Sensitivity - 86dB for 2.83V @ 1m
Configuration - 4 inch 2 way
Bass drivers - Nominal 100mm(4") doped paper cone, with a 25mm (1") voice coil wound on high temperature Kapton former
Tweeter - 25mm(1") fabric dome adjustable eyeball
Crossover Points - 2kHz
Impedance - Nominally 6ohms
Enclosure - Bass reflex, front vented
Dimensions - 305mm high x 220mm wide x 100mm deep
Mounting Cut-Out - 275mm high x 190mm wide
Finish - White (Paintable)
Input Terminals - Push Type
Weight - 2.5kg each
|